HomeUtahContractor License

Contractor License in Utah: Cost, Steps & How to File

Every Utah business owner eventually asks the same three things about a contractor license: who issues it, roughly what it costs, roughly how long it takes. The first one has an Utah-specific answer and it's at the top of this page.

Utah fee (verified)
$175
Typical cost (US range)
$100–$5,000
Typical timeline
30–180 days
Who needs it
general contractors and specialty trades (electrical, plumbing, HVAC, roofing)

What we verified for Utah

Every figure in this box was found on the page linked underneath it, by machine, on 9 August 2026 — we publish no number we could not locate on the government page we cite. It is the part of this page that is actually about Utah; the process, documents and ranges further down are the national pattern.

Issuing office
Division of Professional Licensing (Utah Department of Commerce)
Fee
$175
Renewal fee
$128

Source

Who issues a Contractor License in Utah

In Utah, the state office below issues this. Your city or county can require its own permit on top of it — clearing one does not clear the other.

Contractor regulation is not uniform: some states license, some only register, and in some states general contracting is regulated by the city or county instead.

Finding your local office

Start with the city your address sits in — the relevant department is usually called Planning, Building, Community Development, or Business Licensing. If your address is unincorporated, the county performs that role instead. Calling the main switchboard and asking who handles this is usually faster than searching.

Starting point for anything else in Utah: the state business portal, https://corporations.utah.gov. It is a starting point, not the issuer of this permit.

The general US process

This sequence is the shape the process takes across the US. It is not a list of Utah requirements, and no step here should be read as one — the issuing office named above sets the actual requirements.

  1. Step 1: Find out what your state actually operates: a licence with exams, a registration with a bond, or nothing at state level, leaving it to the city or county.
  2. Step 2: Check what triggers the requirement. Project-value thresholds are common, and the number differs everywhere.
  3. Step 3: Read the issuing office's own requirement list rather than a generic one. Some states ask for documented experience and exams; others ask only for a bond and insurance.
  4. Step 4: Get the surety bond and the liability cover in the amounts that office publishes.
  5. Step 5: Sit whatever exams that office requires, if it requires any.
  6. Step 6: Apply and pay the fee.
  7. Step 7: Expect a background check in many states.

What varies: whether it is a licence or a registration, whether exams or experience are required at all, bond and insurance amounts, and whether the trade is regulated by a separate board.

Documents usually asked for

A typical list, not an Utah checklist.

Heads up: The government fee is the floor. Filing services will quote you several times that to handle it. For a simple setup the official route is usually straightforward; for a complicated one — multiple states, unusual ownership — paying someone can be the cheaper mistake to avoid.

Related permits in Utah

Business License in UtahEmployer Registration in Utah

Contractor License in states bordering Utah

Rules stop at the state line — same permit, each state bordering Utah:

Contractor License in ArizonaContractor License in ColoradoContractor License in IdahoContractor License in NevadaContractor License in New MexicoContractor License in Wyoming

See Contractor License in all 50 states & DC →

Frequently asked questions

Who issues a contractor license in Utah?

Division of Professional Licensing (Utah Department of Commerce). The state office named at the top of this page issues it, and your city or county may require its own on top.

How much does a contractor license cost in Utah?

The Utah figure is $175. Renewal is $128. That was found on the government page linked at the top of this page, not written by us. For comparison, the typical US range is $100–$5,000.

How long does it take to get a contractor license in Utah?

Typical US processing is 30–180 days, and expedited handling is often available for a fee. The issuing office publishes its own turnaround, and that is the number to trust.

What is Utah-specific on this page: the issuing office, every figure in the verified Utah box, each one located on the government page it cites. Everything else — the numbered process, the document list, the cost and timeline — is the general US pattern, not an Utah rule, and is labelled that way above. Requirements, fees and deadlines are set by the issuing office; confirm with it before you file or pay.